Broadband passive isolators based on coupled nonlinear resonances

Abstract

Isolators are devices that transmit waves only in one direction, and are widely used to protect sensitive equipment from reflections and interference. These devices inherently require the breaking of Lorentz reciprocity, which can be achieved with an external bias, such as a magnetic field, that breaks time-reversal symmetry. Alternatively, nonlinear effects can be used, which offer a route to fully passive devices that do not require any form of external bias. However, the nonlinear isolators developed so far have limitations in terms of insertion loss, isolation, bandwidth and isolation intensity range. Here, we show that any isolator formed from one nonlinear resonator suffers from these limitations, and that they can be overcome by combining multiple nonlinear resonators with suitable intensity dispersion. We theoretically show, and then experimentally demonstrate using a microwave circuit, that the combination of one Fano and one Lorentzian nonlinear resonator, and a suitable delay line between them, can provide unitary transmission, infinite isolation, broad bandwidth and broad isolation intensity range. We also show that a larger number of resonators can be used to further increase the isolation intensity range without diminishing the other metrics of the device. Passive isolators that offer unitary transmission, infinite isolation and large non-reciprocal intensity range can be created by combining Fano and Lorentzian nonlinear resonators, separated by suitably designed delay lines.

Cite this article

Sounas, D.L., Soric, J. & Alù, A. Broadband passive isolators based on coupled nonlinear resonances. Nat Electron 1, 113–119 (2018). https://doi.org/10.1038/s41928-018-0025-0

View full text

>> Full Text:   Broadband passive isolators based on coupled nonlinear resonances